Whether you're using a desktop or laptop computer, there's a good chance that if you stop what you're doing and listen carefully, you'll hear the whirring of a small fan. If your computer has a high-end video card and lots of processing power, you might even hear more than one.
In most computers, fans do a pretty good job of keeping electronic components cool. But for people who want to use high-end hardware or coax their PCs into running faster, a fan might not have enough power for the job. If a computer generates too much heat, liquid cooling, also known as water cooling, can be a better solution. It might seem a little counterintuitive to put liquids near delicate electronic equipment, but cooling with water is far more efficient than cooling with air.
So what is water cooling? How does it compare to air cooling? Is it even necessary?
The hotter your processor, the worse it performs--modern CPUs will clock themselves down and finally shut off before they damage themselves, but in the old days it was easy to fry your CPU by running too hot. You can increase the performance of your CPU (and your RAM, and your GPU) by overclocking and overvolting, but that requires more energy, and thus puts out more heat. Basically: the better you cool your components, the better they'll perform and the longer they'll last.
In a liquid cooler, liquid flows through channels carved directly into the top of the heat sink, and is pumped away from the CPU toward a radiator (which actually cools via convection). The radiator has a fan (or several fans) that constantly blow over its fins, heating the air and cooling the fins. The fins cool the radiator, which cools the water, which is constantly circulating through the loop and keeping the CPU cool. Whew.
Rather than having a two pound cube of metal fins hanging from your motherboard, you just have a small water block and some tubes leading elsewhere.
It involves a constantly circulating supply of liquid to keep the CPU cool, rather than just a hunk of metal, a closed-loop liquid cooling system is more complicated than an air cooler. A liquid cooling loop needs a water block, a pump, a radiator, fans, a reservoir for additional liquid, and the tubes and fittings to connect all of these parts together.
In most computers, fans do a pretty good job of keeping electronic components cool. But for people who want to use high-end hardware or coax their PCs into running faster, a fan might not have enough power for the job. If a computer generates too much heat, liquid cooling, also known as water cooling, can be a better solution. It might seem a little counterintuitive to put liquids near delicate electronic equipment, but cooling with water is far more efficient than cooling with air.
So what is water cooling? How does it compare to air cooling? Is it even necessary?
The hotter your processor, the worse it performs--modern CPUs will clock themselves down and finally shut off before they damage themselves, but in the old days it was easy to fry your CPU by running too hot. You can increase the performance of your CPU (and your RAM, and your GPU) by overclocking and overvolting, but that requires more energy, and thus puts out more heat. Basically: the better you cool your components, the better they'll perform and the longer they'll last.
In a liquid cooler, liquid flows through channels carved directly into the top of the heat sink, and is pumped away from the CPU toward a radiator (which actually cools via convection). The radiator has a fan (or several fans) that constantly blow over its fins, heating the air and cooling the fins. The fins cool the radiator, which cools the water, which is constantly circulating through the loop and keeping the CPU cool. Whew.
Rather than having a two pound cube of metal fins hanging from your motherboard, you just have a small water block and some tubes leading elsewhere.
No comments:
Post a Comment